Abrasion Resistance
The wear (abrasion) of cover compounds is the biggest influence on the working life of a belt. Fenner Dunlop abrasion resistant belting provides up to 50% longer wear life versus the competition because the rubber covers we use exceed international quality standards.
We have several cover compounds that help with abrasion, but the 3 listed below are our a few of our favorite abrasion-resistant compounds:
Available Cover and Rubber Compounds
OptimaHeat
OptimaHeat cover compound retains its heat resistance after continuous operation up to 400 degrees F, with minimal abrasion degradation. This new proprietary cover resists…
White Granite
Recommended for specialized food grade applications in which conveyed material is required to avoid any colour contamination.
Granite (LM)
Excellent where heavy, continuous abrasion is the primary concern. Good resistance to cutting and gouging. Recommended for most above-ground abrasive material handling applications, such as…
FireBoss CSA-C OR
(Flame, Freeze, & Oil Resistance) Moderate oil resistant covers for grain handling. Compounded for colder operating climates. Temperature range -40 deg to 300 deg F…
FireBoss CSA-A2
Meets Canadian standards association M422- M87 current specification for Grade A2 Ideal when an increased fire retardant level is desirable. For underground Coal Mining Applications.
Sahara Alumina
A special compound designed to offer resistance to heat, abrasion, and the impact of Alumina on the long term rubber compound properties. Heat resistant to…
FireBoss CSA-C AR
Fire Retardant cover compound with abrasion resistance for mining and industrial applications. Meets Canadian standards association M422- M87 current specification for Grade C or B2…
Guardian SAR
ARPM Grade I Fire retardant abrasion resistant compound that meets ARPM-FR Class 2 High-quality Grade I fire retardant compound specifically designed to counter the negative…
DeltaHeat 2.0
Delta Heat® 2.0 is Fenner Dunlop’s new and improved premium hot material compound designed to resist the negative effects of cover cracking, hardening, flexing, tearing…
FireBoss SAR
Meets MSHA Title 30 Part 14 B.E.L.T. standard. Ideal when an increased fire retardant level is desirable. For underground Coal Mining Applications.
MINING-FSAR
Meets U.S. Mine Safety and Health Administration requirements per MSHA Title 30, Section 18.65.
White DeltaHeat
Temperature resistant to 350 deg F ( 177 deg C) for abrasive course lumps (2 inches +/ 50 mm +) and 300 deg F (149…
Guardian / Mining-FAR / Mining-FFAR
Specifically designed to counter the negative effects of leaching agents as well as dust suppressants. Meets MSHA 2-G requirements. Increased resistance to abrasion and cover…
Guardian AR
High quality grade II fire retardant compound specifically designed to counter the negative effects of leaching agents as well as dust suppressants. Meets MSHA 2-G…
Matchless Plus
Provides the same features of Matchless, but with approximately 15% greater service life. Compounded for the most severe cut, gouge and impact applications.
Fireboss AR
Meets MSHA Title 30 Part 14 B.E.L.T. standard. Ideal when an increased fire retardant level is desirable. For underground Coal Mining Applications. The only cover…
