The wear (abrasion) of cover compounds is the biggest influence on the working life of a belt. Fenner Dunlop abrasion resistant belting provides up to 50% longer wear life versus the competition because the rubber covers we use exceed international quality standards.

We have several cover compounds that help with abrasion, but the 3 listed below are our a few of our favorite abrasion-resistant compounds:

Available Cover and Rubber Compounds

Abrasion Heat

OptimaHeat

OptimaHeat cover compound retains its heat resistance after continuous operation up to 400 degrees F, with minimal abrasion degradation. This new proprietary cover resists hardening and cracking while retaining its flexibility when running under extreme and high heat conditions Key Characteristics: Better Heat Aging Better Abrasion Resistance Improved Cracking…

Read more

Abrasion

White Granite

Recommended for specialized food grade applications in which conveyed material is required to avoid any colour contamination.

Read more

Abrasion

Granite (LM)

Excellent where heavy, continuous abrasion is the primary concern. Good resistance to cutting and gouging. Recommended for most above-ground abrasive material handling applications, such as coal, coal mine refuse, crushed ores and rock, slag, limestone, potash, trona, salt, sand, aggregate and other abrasives.

Read more

Abrasion Heat Low extraction

Sahara DS

Provides good abrasion resistance in elevated operating temperature environments. Temperature resistant to 300 deg F (149 deg C) for abrasive coarse lumps ( 2 inches +/50 mm +) and 250 deg F (120 deg C) for abrasive fines.

Read more

Abrasion Fire Oil

FireBoss CSA-C OR

(Flame, Freeze, & Oil Resistance) Moderate oil resistant covers for grain handling. Compounded for colder operating climates. Temperature range -40 deg to 300 deg F (-40 def to 95 deg C). Surpasses U.S. Occupational Safety and Health Administration specifications for static conductivity. The cover is also flame retardant per MSHA…

Read more

Abrasion Fire Oil

FireBoss CSA-A2

Meets Canadian standards association M422- M87 current specification for Grade A2 Ideal when an increased fire retardant level is desirable. For underground Coal Mining Applications.

Read more

Abrasion

Alumina

A special compound designed to offer resistance to heat, abrasion, and the impact of Alumina on the long term rubber compound properties. Heat resistant to 200° F for fine material.

Read more

Abrasion Fire

FireBoss CSA-C AR

Fire Retardant cover compound with abrasion resistance for mining and industrial applications. Meets Canadian standards association M422- M87 current specification for Grade C or B2 For surface applications.

Read more

Abrasion Cut/Gouge

Giant XE

High durability recipe offering resistance to dedusting agents or hygroscopic materials. A Premium compound that meets all ARPM Grade 1 specifications, suitable for applications such as cement, aggregates, rock, copper, gold, limestone, potash and salt. Ideal for heavy and abrasive materials and specially designed for dry and dusty applications.

Read more

Abrasion Fire

Guardian SAR

ARPM Grade I Fire retardant abrasion resistant compound that meets ARPM-FR Class 2 High-quality Grade I fire retardant compound specifically designed to counter the negative effects of leaching agents as well as dust suppressants. •Excellent abrasion and cover wear characteristics. •Recommended for Power Generation Facilities and Coal Prep Plants

Read more

Abrasion

DIN-Y

Compliant with European DIN standard “Y”. ARPM Grade 1 compliant cover which provides increased service life without increasing cover thickness. Performs well in high impact applications and applications requiring excellent resistance to wear.

Read more

Abrasion Heat Low extraction

DeltaHeat 2.0

Delta Heat® 2.0 is Fenner Dunlop’s new and improved premium hot material compound designed to resist the negative effects of cover cracking, hardening, flexing, tearing and abrasion associated with high-temperature environments. Delta Heat® 2.0 Temperature resistant to 400°F (205° C) for abrasive coarse lumps (2 inches +/ 50mm +) and…

Read more

Abrasion Fire

FireBoss SAR

Meets MSHA Title 30 Part 14 B.E.L.T. standard. Ideal when an increased fire retardant level is desirable. For underground Coal Mining Applications.

Read more

Abrasion Fire

MINING-FSAR

Meets U.S. Mine Safety and Health Administration requirements per MSHA Title 30, Section 18.65.

Read more

Abrasion Fire

MINING-FFSAR

High Quality Grade II Fire Retardant with excellent abrasion resistance.

Read more

Abrasion Heat Low extraction

White DeltaHeat

Temperature resistant to 350 deg F ( 177 deg C) for abrasive course lumps (2 inches +/ 50 mm +) and 300 deg F (149 deg C) for abrasive fines. Recommended wherever a premium high-temperature belt is required. Provides maximum service life on enclosed systems with high environmental temperatures.

Read more

Abrasion Fire

Guardian / Mining-FAR / Mining-FFAR

Specifically designed to counter the negative effects of leaching agents as well as dust suppressants. Meets MSHA 2-G requirements. Increased resistance to abrasion and cover wear. Recommended for power generation facilities and coal prep plants.

Read more

Abrasion Fire

Guardian AR

High quality grade II fire retardant compound specifically designed to counter the negative effects of leaching agents as well as dust suppressants. Meets MSHA 2-G requirements. Excellent abrasion and cover wear characteristics. Recommended for Power Generation facilities and Coal Prep Plants

Read more

Abrasion Fire

FireBoss

Meets MSHA Title 30 Part 14 B.E.L.T. standard. Ideal when an increased fire retardant level is desirable. For underground Coal Mining Applications.

Read more

Abrasion Cut/Gouge

Platinum

Good abrasion resistance. Good endurance against combined cutting, gouging and heavy impact. Recommended for transporting large, heavy lump ores, granite, and trap rock.

Read more

Abrasion

Granite

Excellent where heavy, continuous abrasion is the primary concern. Good resistance to cutting and gouging. Recommended for most above-ground abrasive material handling applications, such as coal, coal mine refuse, crushed ores and rock, slag, limestone, potash, trona, salt, sand, aggregate and other abrasives.

Read more

Abrasion Cut/Gouge

Matchless Plus

Provides the same features of Matchless, but with approximately 15% greater service life. Compounded for the most severe cut, gouge and impact applications.

Read more

Abrasion Cut/Gouge

Matchless

Matchless (RMA Grade 1) Superior endurance against combined cutting, gouging and heavy impact. Recommended for transporting large, heavy lump ores, rocky earth, granite, trap rock and quartz. Unequalled in conveying heavy logs from debarker. Good abrasion resistance. Superb for glass cullet handling and other types of sharp, abrasive material.

Read more

Abrasion Cold Cut/Gouge

ZR1

Exhibits excellent tensile and abrasion resistance. Good resistance to cutting and gouging. Great in extreme temperatures.

Read more

Abrasion Cold Oil

ZR2 ORB

Resists combined effects of cold, abrasion and petroleum or oil based products Cold weather resistance to -50° F (-46° C) Great for conveying oil sands, bitumen, oil-sprayed coal and similar materials…

Read more

Abrasion Fire

Fireboss AR

Meets MSHA Title 30 Part 14 B.E.L.T. standard. Ideal when an increased fire retardant level is desirable. For underground Coal Mining Applications. The only cover compound on the market to meet the stringent CSA-A2 standards. Exceeds ARPM FR class 1 requirements. Ideal when an increased fire retardant level…

Read more

Abrasion Cut/Gouge

Titanium

Provides increased service life without increasing cover thickness. Exhibits excellent abrasion-resistant characteristics. Compliant with DIN Standard “Y” Recommended for application requiring superior resistance to abrasion and wear, outstanding in high impact applications. Best for abrasion resistance Get more life with less cover thickness Performs well in high-impact applications

Read more

Abrasion Cut/Gouge

ZR3

Offers the absolute best resistance to heavy, continuous abrasion. Increased service life without increasing cover thickness. Exhibits excellent tensile and superior abrasion resistance. Good resistance to cutting and gouging + frigid temperatures.

Read more

Fenner Dunlop Conveyor Belting